How to close the joints of the laminate

How to close the joints of the laminate Table of contents:

  • 1 Sealant for processing
  • 2 Tools and materials
  • 3 Features of laying laminate panels
  • 4 Small Tips for Beginners to Repair
  • 5 videos

Great solution for flooring – it’s laminate lamels. Installation of a laminate does not require special skills. Laminate flooring – An inexpensive and reliable coating that fits practically into any interior. The only thing you need to do during installation laminate flooring is to close joints. Since the basis of the laminate is a fiberboard, then when moisture gets under the panel, it swells and deformed. A prerequisite for the installation of laminate boards –– this is joint sealing. It’s important how to close the joints laminate flooring.

Sealant for processing

Gel for jointsGel for joints

Sealant is a special gel with which seams, gaps and joints are processed. It doesn’t happen bonding joints, which is a big plus when required replace the panel.

It is best to choose a sealant that includes silicone. Such a silicone-based product has very good operational properties:

  • reliability;
  • long service life;
  • the possibility of using a hermetic for any temperature conditions.

Sealant for a laminateLaminate sealant

In addition to silicone, the hermetic gel contains the following Components:

  • additives: quartz flour, chalk;
  • antifungal substances;
  • dyes;
  • and substances that reduce the viscosity of the gel.

If the question is how to repair the joints of the flooring from laminate boards, resolved, it is now necessary to prepare tools and materials for their processing.

Tool and materials

Sealant for locks

If the question is how to repair the joints of the flooring from laminate boards, resolved, it is now necessary to prepare tools and materials for their processing.

Tool and materials

Sealant for locks

Before using sealant, you must familiarize yourself with instructions for use. If sealant is used in residential indoors, carefully study its composition, for availability harmful chemical components.

  1. Silicone based sealant.
  2. Rubber mallet.
  3. Ruler, pencil.
  4. Jigsaw.
  5. Latch.
  6. Wedges are spacer.

Before laying laminate, carefully prepare the floor on which the laminate panels will be laid. Than the smoother the base, the less processing time joints.

Features of laying laminate panels

Joint of a laminate with a tileLaminate joint with tile

  1. The basis for installing the laminate should be dry, clean and even. Surface differences should not exceed 3–5 mm per one meter. Otherwise, the panel joints will loosen quickly and will become unusable, which will require additional temporary and material costs for dismantling and installing the laminate.
  2. If the differences in the base are more than 5 mm per meter, it is desirable make a new screed and only then lay laminate panels. The smooth surface of the base allows you to correctly lay out the substrate under laminate in order to protect the flooring from moisture.
  3. The first row of panels must be laid out with deformation a gap of 8 mm. This clearance should be maintained around the perimeter. rooms with spacer wedges. This is done in order to laminate with a change in temperature in the apartment (room) “breathed” and moisture did not accumulate under it.
  4. When assembling panels, it is necessary to lubricate the joints with airtight means. Excess gel must be thoroughly removed with a sponge or wet with a cloth. All other panels are mounted in the same way. After all laminate joints will be finished sealed.
  5. The gaps that remain in the doorway can be decorated elements such as skirting boards or sills. How to miss joints between laminate and baseboard? You can use the same sealed silicone gel.
  6. If the laminate board joins:
    • with linoleum – close the seams with a plastic nut;
    • with tiles – close the seams with a nut made of aluminum;
    • with a stone surface – it is advisable to close the joints with cork plates.

Joint with laminateJoint with laminate

Small tips for beginners to repair

Joint in the doorwayJoint in the doorway

  1. Silicone based sealant does not stick laminate. The gel does not give penetrate excess moisture under the flooring, therefore, when if necessary, you can easily replace several panels.
  2. If expensive flooring is used high-quality laminate, then apply sealant no necessary. The joints of this laminate are already processed water repellent.
  3. If a warm floor system is installed in the living room, then Do not use adhesive laminate. Since this is a coating non-separable, and in the event of a breakdown of the floor heating system, it will be necessary shoot the entire laminate. And this means that it takes time to laying of a new floor covering and there will be material costs for the acquisition of new laminate panels.
  4. It is necessary to lay the laminate coating along the doors, windows or verandas, that is, along a natural light source. Otherwise the falling shadow will emphasize the joints of the panels, which will make the room less aesthetic. If there are several windows in the room, then installation start from a large window diagonally. This method is more costly but most effective.


This video shows how to mount a skirting board with different types. fastenings:

And this video is about installing a flexible profile:

And this video is about installing a flexible profile:

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: