DIY waterfall in the country

How to make a waterfall in the country Table of contents:

  • 1 Location
  • 2 The main nuances when choosing the shape of the reservoir
  • 3 Stages of work
  • 4 Arrangement of the base
  • 5 Cascade. How to organize a waterfall beautifully and naturally?
  • 6 Scenery
  • 7 Installing the pump
  • 8 Photos

Want to make your garden sound? Make him your pride and decorating the infield? Then you should think about the construction of the soul of the garden – about the arrangement of a waterfall. And it doesn’t matter you have a large piece of land or not, because you can do reservoir according to own project. In this article, we will describe how to make a babbling miracle on our own, we will describe all the stages of work on its arrangement.

Location

The uniqueness of any reservoir is that it is in any the place looks interesting – in sunny meadows and in the shade trees. It looks very nice if they are planted around flower beds with flowers.

A collector is needed for falling water – this is an artificial pond. And here a standard problem arises for this situation – lowering water level. At the same time, large leaks will lead to subsidence of the soil, which is not very desirable when constructing a flowing pool water. In order to avoid such a problem, you need to properly waterproof the pond. But more on that later.

Small waterfall in front of the windowSmall waterfall in front by the window

When choosing the location of a waterfall, remember that ideal the surface for it will be a slope. It only emphasizes the natural the beauty of the landscape. However, even if you do not have a suitable place, then you can build an artificial embankment. It is important for stimulation of water movement. The surface of the embankment should resemble natural relief. It’s not necessary to scrupulously create everything pits and bulges, because in nature there are no slides with ideal forms.

The main nuances when choosing the shape of the reservoir

Waterfall ConstructionWaterfall construction

Elegantly curved configurations and irregularly shaped bowls look more attractive, because they resemble natural landscape. Therefore, you should think about such a geometry of a waterfall, which would be a smooth continuation of your land, merging with its relief.

In accordance with the purpose of the reservoir should be determined and its depth. If its sole purpose is water storage, then the depth of the reservoir does not matter. However, if you have a desire plant ornamental fish or plant aquatic plants, then the depth bowls should be no less than 0.5 m. Only in this way you can protect animals and plants from death in the winter, because in this case, the water will not freeze to the bottom. If the intended the reservoir will be used for swimming, it should be equipped so that to relax in the pool was convenient for all family members.

Work stages

Marking a pond with a waterfallPond marking with a waterfall

The pool under the drain must have two tanks. Volume each of them should be thought out in detail. However, there are the nuances. The volume of the container below should exceed the size the one on top. Waterfalls in the country can be built from finished blocks or natural stone. Materials can be bought at specialty store or find somewhere in nature for example near the river.

Materials you may need:

  1. Primer.
  2. Sand.
  3. Pebbles.
  4. Waterproofing mixture.
  5. Quartzite.
  6. Cement.
  7. Water pump.
  8. Fiberglass.
  9. Glutinous building mix.

Drive the pegs along the outline of the foundation pit and pull the ropes. Clean the ground that forms during digging roots, stones and debris. The fact is that when arranging a waterfall she will be very useful to you. If the pit is ready, fill the bottom A 12-centimeter layer of sand, and then carefully compact it.

Arrangement of the base

Capacity must be set by levelCapacity must be set by level

The base or bottom of the pond can be made of concrete, film or brick. In addition, you have the opportunity to purchase ready-made PVC shape. It comes in different sizes and shapes.

If you are going to make a concrete foundation for a pond with waterfall, then first you have to lay waterproofing. Then pour a layer of concrete, on top of which should be pressed metal reinforcing mesh. Now the foundation follows again concrete, the thickness of the second layer should be at least 5 see. If you are not satisfied with the completely concrete base, then in You can use brickwork as the first layer. Her need to be done along the contour of the future reservoir. Such an option arrangement takes a lot of time.

If you use a special film, then to the bottom of the pit you need to pour moistened sand, about 3 cm, then lay the film, pressing her around the edges with stones. The coating will take the desired shape after filling the pit with water. At this point, you can trim edges, leaving 20 cm of the film that needs to be pinned to the soil metal studs. They will subsequently need to be filled up ground. Cover the bottom of the container with soil, lay the stones natural origin.

Layout of stonesStone layout

The most practical solution to waterproofing and pit arrangement will be PVC film, it has a long term almost 15 years of operation. Besides you can insulate the bottom with butyl rubber, it has even more Long service life – 30 years.

It is worth considering one fact: when freezing in winter, water expands, and from this breaks even the highest strength film! Because of this, for the winter, water should be drained from the reservoir.

Cascade. How to organize a waterfall beautifully and naturally?

Arrangement of a cascade waterfallArrangement of cascade waterfalls

Stone steps look the most natural. For this purpose It’s best to pick flat and wide stones. Concerning nature and height of water fall, then everything rests on your preferences and intentions. Stones you will need to fasten together cement mortar. Today, there are ready-made cascades on sale. Also, a decorative item can act as a source, for example, a flower, a jug or a frog, or maybe something else.

The easiest way is to create a rigid form, say, a vessel and decorate it using stones for this. If you prefer to remain individual in everything, then there will not be place blanks, everything should be done with your own hand. For water flow downward, with the effect of breaking it into streams and trickles, think over possible obstacles. It can be ledges small height – about 30 cm. Creating a ledge is better to start below, gently raising it above the water. Optimum cascade size is 1.5 m.

Decoration

Waterfall-Alpine hillWaterfall Alpine hill

From how you imagine the finished waterfall, in many ways depends on the manufacturing process of the ledges. If on the upper tier you make a narrow space between the stones, then the water will run more rapidly. So the wave with noise and foam will be crashing on stones.

If you want the water to flow down evenly, forming a flat line, cascade with flat stones, having smooth edges. They should be laid out on the principle of a pyramid. If you are attracted by streams of water breaking into streams, equip the waterfall with jagged, uneven, and even sharp stones. If you like a slowly flowing and pacifying stream flowing water, then use stones that have recesses in the middle. Filling, water from such natural bowls will smoothly pour into the next tier, which is a little lower in level. Anyway, you will have to put all the ledges cement mortar. Think of special sides in the bottom spill, so you prevent the possibility of large spatter water from an artificial source.

Pump installation

Of course, water will not get to the upper tier on its own, therefore, after decorating the pool and building a cascade to it, you will have to install a pump. Before heading to the store for by buying the unit, measure the height of the cascade. If the building is not more than 1.5 m, the pump power may not exceed 70 watts. However, if the design came out tall and more massive, then you need a device more powerful.

Pumps suitable for waterfallsPumps suitable for waterfalls

If you choose a model equipped with a flow regulator, then you can regulate the stream of water in the future, making it weaker or stronger. To recharge the pumping system, you also need low voltage transformer. It can’t be installed on the street, therefore, give him a place in the utility room. Usually the cables used for connection exceed a length of 9 m, due to which they most often need to be extended. For this purpose you will need connectors that are not afraid of water.

It should also be noted that if the cable is longer than 12 m, this will affect the pump’s working capacity. From this unit will work worse. Given this, you should purchase a pump with more power.

The device is mounted on the bottom of the pond so that it is invisible to others. The same applies to cable and water hose. The design feature of the pump are 2 holes available. In one of them, water is absorbed, and from the second she is pushed out. Hoses must be connected to both holes. At the bottom of the pond is a hose that draws in water, and to the top of the cascade is the one that pushes it.

Now you can fill the pool with water and start the pump. If you plan to start fish, then after starting the water you can release into the pond. The cascade looks very beautiful moss and decoratively growing flowers. At the end of the preparatory work You can refine the waterfall with decorative plantings. Your work will be appreciated by households.

Have you already done such facilities in the country? What difficulties do you have occurred during the execution of work? What helped you deal with them? Have you invented innovative technology? Share your experience with us! We value your skills and knowledge.

Recommended:

  • wooden swing for a summer residence;
  • alpine hill (step by step instructions);
  • how to make a gazebo made of wood.

A photo

Bookmark a pond with a waterfallBookmark the pond with a waterfall

Waterfall in the stonesWaterfall in stones

With multiple spoutsWith multiple spouts

With a cascade of stairsWith cascade stairs

Waterfall CreekCreek waterfall

Waterfall isletWaterfall islet

CalmCalm stream

The simplest scheme of the device fallsSimplest scheme waterfall devices

The stream breaking on stonesStream crashing about the stones

Arrangement of a waterfall-streamArrangement creek falls

Cascade of a waterfall with a spout in the form of a jugCascade of waterfall with pitcher spout

How to position the pumpHow to position the pump

Spout in the form of a jugPitcher Spout

Large waterfall from limestoneBig waterfall from flagstone

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: