DIY screen for a room

Screen for the room Table of contents:

  • 1 Design Features and Benefits
  • 2 Some ideas for making
  • 3 Selection of materials and tools
  • 4 Step by step instructions
  • 5 videos

To complement the room with an original and functional decor, do not you always need to immediately buy expensive items. For today day there are many options and ideas that can be implemented from improvised materials. This article will show you how to a screen is made for the room, which will allow you to save family budget.

Design Features and Benefits

Design Features and Benefits

The first screens appeared decades ago in Japan. Due to the compactness and versatility of the subject, it is used and in the modern interior of the bedroom, nursery, dressing room and studio apartments. The screen in the room simultaneously performs several features:

  • zoning;
  • separation of a small space from the total area;
  • decoration.

The design of the screen can be varied, and vary in the number of targets. The following types are distinguished:

  • single leaf;
  • bivalve;
  • tricuspid;
  • four-leaved.

A special advantage of manufacturing a screen is not only minimum costs for its creation, but also the ability to decorate various materials. As materials you can use textile residues from the design of curtains or curtains. Every leaf can be made of different materials. If necessary quickly change the interior, it is enough to paint the frame in a different color.

As a decor, you can use applications, embroidery, drawings and photographs.

A few ideas for making

A few ideas for making

You have the opportunity to implement a variety of ideas, below only some of them are given:

  1. Sliding screen partition from MDF. This option is the simplest and does not require much time and money. Everything, that what needs to be done is to fasten the finished MDF boards. Since on them already have decorative door hinges, then you do not need to buy them, but this saving. The base is ready and you can start decorating it.
  2. Screen with frame. This option is more time consuming. Basis a special frame made of wood or metal is taken. Since with metal process will be more time consuming, it will be necessary use welding and special tools then maybe preference is given to wood. It’s enough to pick wooden bars that are glued together with wood glue and reinforced with a corner. Before starting decorating the frame, its surface is necessary primer and paint. As a decoration material You can use thick cardboard, wrapping paper, Floristic paper, textile.
  3. Screen in oriental style. To give an oriental interior zest, you can consider the option of making bamboo. For stems are selected thick stems, and for the target – thin. Connect them together with a jute cord. Lightweight fabrics give the interior of a certain airiness and ease.

To increase functionality, just attach to it wheels.

Selection of materials and tools

Selection of materials and tools

The exact list of the required tool will depend on on the type of construction and material selected for the decor and base. To make a simple screen from wood, you must purchase such materials:

  • wooden beam;
  • the cloth;
  • threads
  • paint;
  • putty;
  • door hinges (2 pieces per section).

In the list of tools will be:

  • paint brushes;
  • fine sandpaper or sander;
  • screwdriver;
  • hammer;
  • roulette;
  • pencil;
  • saw;
  • scissors;
  • fasteners (screws, nails, decorative hats).

Type of material, paint color, screen size and number of targets individually selected depending on the planned the interior.

Step-by-step instruction

Step-by-step instruction

When creating a tricuspid screen from wooden blocks it is necessary to adhere to the following sequence of work:

  1. Preparation of material for the base. Need to cut 6 bars, 180 cm high and 6 pieces of 50 cm (width is 15 cm). All blanks are carefully processed with sandpaper or grinder until a smooth surface is obtained.
  2. Prepared elements for the base are laid out on the floor. Short bars should be located between long ones (main ones). Using a screwdriver and screws, you can begin to fasten, with both sides. This pattern applies to each of the three targets.
  3. If there are irregularities in the surface of the wooden bars in the form of cracks, it is necessary to smooth it with putty. After drying it must be thoroughly wiped with sandpaper.
  4. To paint well laid on the surface, it is necessary to apply on her primer layer. After that, paint material is applied in one or two layers.
  5. While the paint is drying, you can start cutting and preparing tissue. It must be fixed on both sides of each target. For 6 patterns of size 152 × 52 cm are prepared for this.
  6. The fabric can be fixed to the basics of the target. convenient way (elastic, loops, construction stapler and other).
  7. At the last stage, all targets are interconnected with help door hinges.

When processing bars for the foundation, attention must be paid corners. To thoroughly paint the tree, it is recommended to apply paint in 2 layers. For additional decoration of the screen and its larger functionality can be sewn onto fabric on-target pockets.

A screen will be an excellent element for zoning a large room. For a small area, it will be inappropriate. Material for the foundation and design can serve almost anything. The main thing is determine the tasks and functions that this interesting piece of furniture.

You might be interested to know:

  • How to design an interior in the style of the avant-garde?
  • How to decorate the interior of the apartment in a Victorian style?
  • What is vintage style?


About how to make the simplest screen model, you can find out watching the video we have proposed:

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: